Society's view of people with visual impairment: 5 stages
Around the world, the education and welfare of people with visual impairment developed in five stages.
| Stage | The view at that time |
|---|---|
| 1. Pre-Christian era | Disability was thought to be punishment for sins of a past life; nobody interfered with a punishment given by God |
| 2. Christian era | Showing pity, giving protection and trying to reduce their suffering |
| 3. Early 19th century | Institutions (special schools) were set up to educate them separately |
| 4. Late 20th century | The movement to bring them into society (integration) began |
| 5. Present era | The idea of need-based special education and inclusive education systems |
- In society, visual impairment causes more difficulty than other disabilities because it is clearly visible from outside. A white cane, dark glasses and a guide dog are seen as signs of visual impairment.
Terms: from "blind" to "visual impairment"
- Old terms such as "blind", "visually handicapped" and "partially sighted" are no longer used. In their place, respectful terms such as "visually challenged", "differently abled" and "persons with special needs having visual impairment" are used.
- In education the umbrella term now most used is "visual impairment". It includes the educationally blind, those with low vision and those with residual vision.
- Loss of central vision, a defect in the visual field, and reduced sight due to eye disease or injury are all called visual impairment. For some, special lenses or surgery improve sight. If sight still does not improve, their education needs special services.
- The term blindness is used for a complete or almost complete loss of sight.
Concepts that decide visual impairment
To define visual impairment, mainly four aspects are looked at: visual acuity, visual field, visual functioning and visual efficiency.
Visual acuity
- Visual acuity tells how clearly the eye can see fine details. It refers only to the clearness of central vision.
- Distance visual acuity is written as a fraction: the distance tested / the distance at which a normal eye can see the same letter.
- Example: 6/60 means this person can see from only 6 metres what a person with normal sight can see from 60 metres. In feet this is 20/200.
- Normal visual acuity = 6/6 (in metres) = 20/20 (in feet).
- Visual acuity depends on three things: (1) how sharply the image is focused on the retina, (2) the health and working of the retina, (3) the sensitivity of the brain that interprets the information.
- It is measured with the Snellen chart (details in the assessment section).
Visual field
- The visual field is how wide an area, in front and at the sides, can be seen while looking at one point without moving the head or eyes.
- A normal person can see an area of about 180 degrees in front with both eyes.
- Visual acuity is "how clearly", the visual field is "how widely" - these are two separate concepts. A person may have good acuity but a very narrow field; such a person may also be treated as blind.
Previous papers questions asked in the exam on what you just read
Field vision of Normal person is
- (1)360°
- (2)180°
- (3)90°
- (4)60°
Answer & explanation
Correct answer: (2) 180°
The question asks for the normal field of vision of a person.
The field of vision is the whole area a person can see to the sides while the eyes look straight at one point, without moving the head or eyes. With both eyes together, a normal person sees about 180° horizontally. It is an important measure in deciding visual impairment: under the RPwD Act 2016, a field of vision of less than 10° counts as blindness and less than 40° down to 10° as low vision.
So the answer is option (2) 180°.
360° (1) would mean seeing behind the head without turning, which humans cannot do. 90° (3) and 60° (4) are much narrower than normal; such narrowing (tunnel vision) is seen in diseases like glaucoma and retinitis pigmentosa.
Remember: Normal field of vision with both eyes ≈ 180°.
Individual with normal vision will see the place with 180° angle. It is called as
- (1)Visual Function
- (2)Visual Acuity
- (3)Visual Efficiency
- (4)Visual Field
Answer & explanation
Correct answer: (4) Visual Field
The question asks the name for the whole area, about 180°, that a person with normal vision sees while looking straight ahead.
The visual field is the total area, including the sides, that can be seen while the eyes are fixed on one point. For normal vision it is about 180° horizontally. Under the RPwD Act 2016, a field of vision of less than 10° counts as blindness, so blindness is judged by the visual field as well as by acuity.
So the answer is option (4), visual field.
Visual acuity (2) is the sharpness of vision at a distance, measured with the Snellen chart, not in degrees. Visual efficiency (3) is how well a person uses the vision they have for tasks. Visual function (1) is a general term for how the eye works, not the name of the 180° area.
Remember: Degrees (180°) = visual field; 6/6 = visual acuity.
A person with normal vision can see with his both eyes with 180° area is called
- (1)Visual Function
- (2)Visual Efficiency
- (3)Visual Acuity
- (4)Visual Field
Answer & explanation
Correct answer: (4) Visual Field
The question asks for the name of the whole area a person can see at one time with both eyes.
The visual field is the total area seen while the eyes look straight ahead without moving the head or eyes. With normal vision, the two eyes together cover about 180° horizontally. A visual field narrowed to 20° or less is also counted as visual impairment.
So the answer is option (4), Visual Field.
Visual Acuity (3) is the sharpness or clearness of vision, measured with the Snellen chart (for example 6/6). Visual Efficiency (2) is how well a person uses the vision they have in daily tasks. Visual Function (1) is a broad term for how the eyes work; it is not the name for the 180° area.
Remember: Degrees of area = Field; sharpness (6/6) = Acuity.
Visual Acuity, Visual field are
- (1)Both are different
- (2)Both are same
- (3)Acuity related only
- (4)Field related only
Answer & explanation
Correct answer: (1) Both are different
The question asks whether visual acuity and visual field are the same thing.
Visual acuity is the sharpness of vision: how clearly a person sees fine details at a given distance. It is measured with a Snellen chart (normal is 6/6). Visual field is the total area a person can see at one time without moving the head or eyes, measured in degrees. The RPwD Act 2016 uses both as separate criteria when it defines blindness and low vision.
So the answer is option (1), both are different.
Both are same (2) is wrong, since one measures sharpness and the other measures width of vision. Options (3) and (4) mention only one of the two and do not answer how the two terms are related.
Remember: Acuity = how sharp; field = how wide.
Visual efficiency
- Visual efficiency is how efficiently a person uses the sight he or she has.
- It includes distance and near visual acuity, control of eye movements, the ability to accommodate, and the brain's ability to process what is seen.
- According to Natalie Barraga, visual efficiency includes these skills: controlling eye movements, adapting to the visual impairment, attending to visual stimuli, and processing visual information quickly.
- Main features:
- It is unique to each child (it differs from person to person).
- It can be increased with training. But no medical, psychological or educational expert can measure it exactly in a clinic or predict it in advance.
- Children learn to see; for this they must keep using their sight actively - this is the basic principle of improving visual efficiency.
- Example: two people may both have visual acuity of 6/60. One may not be able to use that sight at all; the other may use it well. This difference depends on experience, motivation, need and the interest in using the remaining sight.
Visual functioning, residual vision, functional vision
| Concept | Meaning |
|---|---|
| Visual functioning | How far a person is able to use his or her sight for all kinds of tasks |
| Residual vision | The remaining sight that people with visual impairment use for daily tasks |
| Functional vision | Using sight for a particular task; the visual skills needed for daily tasks |
- Even among those identified as legally blind, many have some sight. About 80% of those considered blind can see to some extent.
- This residual vision helps in telling light from dark and in moving slowly from one place to another.
- When deciding low vision, both residual vision and functional vision are considered.
Legal / medical definitions
- The legal definition measures both visual acuity and visual field. It is used to decide whether a person is eligible for legal benefits (concessions, services).
- This legal definition was proposed by the American Medical Association (AMA) in 1934. Later the American Foundation for the Blind (AFB) and associations of the blind in various countries accepted it.
- Legal blindness in the USA (Social Security Administration): central visual acuity of 20/200 or less in the better eye with spectacles; or a visual field whose widest diameter is 20 degrees or less. That means this person can see from only 20 feet what a normal person sees from 200 feet.
| Definition | Blindness means |
|---|---|
| PWD Act 1995, NPCB | (1) Total absence of sight; or (2) visual acuity not exceeding 6/60 (20/200) in the better eye even with spectacles; or (3) visual field of 20 degrees or less |
| NPCB old practical definition | Inability to count fingers from a distance of 6 metres (20 feet) |
| WHO | Visual acuity less than 3/60 in the better eye with best correction; or a visual field of less than 10 degrees around the point of fixation |
| RPwD Act 2016 (current law) | (1) Total absence of sight; or (2) visual acuity less than 3/60 (less than 10/200) in the better eye with best correction; or (3) visual field of less than 10 degrees |
| IDEA (US education law) | Visual impairment that, even after correction, adversely affects the child's educational performance (both partial sight and blindness) |
- NPCB = National Programme for Control of Blindness (started in 1976).
- The current definitions make no difference between "permanent blindness in which even light cannot be seen" and "a state in which light can be perceived but the better eye has less than 3/60" - both are blindness.
- Among the 21 disabilities of the RPwD Act 2016, blindness and low vision are two separate disabilities. 40% or more is a benchmark disability.
Educational / functional definition
- Many educators are not interested in legal and medical definitions. They argue that visual acuity does not correctly tell how a child functions or how well he or she uses the remaining sight.
- "The legally blind have no sight at all" is a common myth; most of them can see something.
- Educational definition: "Those whose impairment is so severe that reading must be taught only through Braille are blind; those who can read print with magnifiers or large-print books are partially sighted."
- Educationally blind: children who cannot read or write with their sight. They learn through Braille, auditory aids, tactile aids and recorded lessons. Many of them have residual vision, which they use for movement.
- The educational definition considers how much the child's sight affects his or her learning, and how much special methods and materials are needed.
Low vision: definitions
- Low vision means a state in which sight is reduced enough to interfere with daily tasks such as reading, cooking, walking safely outside and watching TV, but some usable sight still remains. It cannot be fully corrected with ordinary spectacles, contact lenses, medicines or surgery.
- In general (international, educational) usage, acuity of less than 20/70 in the better eye with best correction is often taken as low vision. This is not the Indian legal limit: under the RPwD Act 2016 (table below) low vision begins at 6/18 (20/60). For example: people who read large-print books with visual aids such as magnifiers and manage their daily tasks.
| Definition | Low vision means |
|---|---|
| PWD Act 1995 | A person who, even after treatment or standard refractive correction, has impaired visual functioning, but uses or can use sight to plan or do a task with a suitable assistive device |
| WHO (1992) | A person who, even after treatment / standard refractive correction, has visual acuity from less than 6/18 down to light perception, or a visual field of less than 10 degrees from the point of fixation, but uses or can use sight for tasks |
| RPwD Act 2016 (current law) | Visual acuity not exceeding 6/18 (less than 20/60) down to 3/60 (10/200) in the better eye with best correction; or a visual field from less than 40 degrees down to 10 degrees |
- The PWD Act 1995 definition has no numbers for acuity or field; experts suggested adding numbers as in the WHO definition: low vision if acuity after best correction in the better eye is between 6/18 and 6/60, or the visual field is between 20 and 30 degrees.
- What the WHO definition stresses: sight is greatly reduced and visual functioning is impaired, but usable sight still remains.
Previous papers questions asked in the exam on what you just read
Persons having Visual acuity 3/60 or less are called
- (1)Dwarfism
- (2)Blind
- (3)Deaf
- (4)Intellectual Disability
Answer & explanation
Correct answer: (2) Blind
The question asks what persons with a visual acuity of 3/60 or less are called.
A visual acuity of 3/60 means the person can see from 3 metres what a person with normal sight sees from 60 metres. 3 ÷ 60 = 0.05, that is one-twentieth of normal vision. Under the RPwD Act 2016, blindness means total absence of sight, or visual acuity less than 3/60 in the better eye even with the best correction, or a field of vision of less than 10 degrees.
So the answer is option (2), blind.
Dwarfism (1) is short stature. Deaf (3) refers to hearing loss. Intellectual disability (4) is a limitation in intelligence and adaptive behaviour. None of these is defined by visual acuity.
Remember: Less than 3/60 = blindness; between 6/18 and 3/60 = low vision.
Blindness means
- (1)Visual acuity less than 3/60
- (2)Visual acuity less than 30/60
- (3)Visual acuity less than 18/60
- (4)Visual acuity less than 24/60
Answer & explanation
Correct answer: (1) Visual acuity less than 3/60
The question asks the visual acuity used in the definition of blindness.
Under the RPwD Act 2016, blindness means total absence of sight, or visual acuity less than 3/60 in the better eye even with the best correction, or a field of vision of less than 10 degrees. An acuity of 3/60 means the person sees at 3 metres what a normal person sees at 60 metres.
So the answer is option (1), Visual acuity less than 3/60.
30/60 (2), 24/60 (4) and 18/60 (3) all mean much better sight. For example, 18/60 equals 6/20, which is near the low-vision range but is not blindness.
Remember: Blindness = acuity below 3/60 or field below 10°.
Field of vision subtending an angle of less than 40° up to 10° are called as
- (1)Blind
- (2)Deaf
- (3)Low - vision
- (4)Dwarf
Answer & explanation
Correct answer: (3) Low - vision
The question asks what we call persons whose field of vision is less than 40° and down to 10°.
Under the RPwD Act 2016, low vision means visual acuity in the better eye with best correction of less than 6/18 up to 3/60, or a field of vision subtending an angle of less than 40° up to 10°. Blindness means a field of vision of less than 10° (or total absence of sight, or acuity below 3/60). So the answer is option (3) Low - vision.
Blind persons have a field below 10°, so (1) is wrong. Deafness concerns hearing and dwarfism concerns height; neither is about the field of vision, so (2) and (4) are wrong.
Remember: Field less than 40° to 10° = low vision; below 10° = blindness.
Exam focus: Normal acuity 6/6 = 20/20; normal field about 180 degrees; acuity and field are different. 6/60 = seeing from 6 metres what a normal eye sees from 60 metres. AMA 1934 = legal definition. PWD 1995 / NPCB blindness = not exceeding 6/60 (20/200) or field of 20 degrees. WHO, RPwD 2016 blindness = less than 3/60 or field of less than 10 degrees. RPwD 2016 low vision = 6/18 to 3/60, or field from less than 40 degrees to 10 degrees. Visual efficiency = Natalie Barraga; it grows with training. Educationally blind = Braille; partially sighted = large print / magnifier.
Memory code: "Old 60-20, New 3-10" - the old Indian definition (PWD 1995): 6/60, 20 degrees; the new one (WHO, RPwD 2016): 3/60, 10 degrees. RPwD low vision "18 to 3, 40 to 10" - acuity 6/18 to 3/60, field 40 to 10 degrees. Normal "6/6, 20/20, 180". AMA = "Law in '34" (1934).